AGN Model Works

US 55 gallon oil drum (Type 1)
US 55 gallon oil drum (Type 2)
US 55 gallon oil drum (Type 1) dented
US 55 gallon oil drum (Type 2) dented

72110 US 55 gallon oil drum (Type 1)

72111 US 55 gallon oil drum (Type 2)

72112 US 55 gallon oil drum (Type 1) dented

72113 US 55 gallon oil drum (Type 2) dented

All drums have the same top plate.

All drums are very well cast, with delicate detail, to the point of having a rim on the underside (where the pour block is situated).
The dented barrels are seemingly identical, which is suboptimal if a number of these barrels are going to be used together (even though putting them at different angles will go a long way).

I measured the diameter at the top rim as 8.3 mm, while the height of the drum is 12.4 mm. This scales out almost exactly to 1/72 based on the real dimensions of 23.5 inches diameter (8.3mm in 1/72) by 34.5 inches high (12.2mm in 1/72) given by Will Alcott.

Preview sample kindly provided by AGN Modelworks.

This model can be purchased from

Article Last Updated:
24 July 2019